Furnaces and Ovens up to 1800°C

Heat on Demand

Fibercraft

Fibercraft™ is a Thermcraft brand of low mass ceramic fiber vacuum formed heating elements and insulation, together in one complete unit.

These heaters are manufactured using high quality, high purity alumina based ceramic fiber. They are offered with maximum operating temperatures of 1100°C (2012°F) or 1200°C (2192°F).

The Fibercraft™ advantages include lower operating costs, increased radiant energy, longer life, low heat loss, more energy efficient, faster heat up, greater temperature uniformity, faster recovery rates, reduced process cycle time, less maintenance, faster cool down, less installation time, and greater productivity.

FIBERCRAFT™ 1100°C (2000°F) HEATERS

VF-360
These cylindrical heaters use a helically wound iron-chrome-aluminum wire partially embedded in the ceramic fiber. Leads can be standard (single strand) or braided (two strands twisted). The heaters are available with intregal vestibules with the opening sized to meet the need of the application.

LINK TO HEATER SPECIFICATION CHART

VF360

VF-180
Theses semi-cylindrical heaters use a helically wound iron-chrome-aluminum wire partially embedded in the ceramic fiber. The heaters can be used in pairs to surround an existing pipe or tube. Leads can be standard (single strand) or braided (two strands twisted). The heaters are available with intregal vestibules with the opening sized to meet the need of the application.

LINK TO HEATER SPECIFICATION CHART

Thermcraft_VF-180-sm

FIBERCRAFT™ 1200°C (2200°F) HEATERS

VFR-180
These semi-cylindrical heaters use a helically wound iron-chrome-aluminum ribbon partially embedded in the ceramic fiber. The design allows for heat to radiate off the coil in three (3) directions. The heaters can be used in pairs to surround an existing pipe or tube. The heaters are available with intregal vestibules with the opening sized to meet the need of the application. Leads can be standard (single strand) or braided (two strands twisted).

LINK TO HEATER SPECIFICATION CHART

VFR180

P-VFR
These low mass plate heaters use a helically wound iron-chrome-aluminum ribbon partially embedded in the ceramic fiber. The design allows for heat to radiate off the coil in three (3) directions. Leads can be standard (single strand) or braided (two strands twisted). Length and width can be customized for most applications.

LINK TO HEATER SPECIFICATION CHART

P-VFR

FP-VFR
The FP-VFR has flanges that allow these heaters to be constructed into boxes, L-shapes, and other configurations. They use a helically wound iron-chrome-aluminum ribbon partially embedded in the ceramic fiber. The design allows for heat to radiate off the coil in three (3) directions. Leads can be standard (single strand) or braided (two strands twisted). Length and width can be customized for most applications.

LINK TO HEATER SPECIFICATION CHART

Thermcraft_fplatewoh_sm

Please click on the brochure that you would like to download.

Please visit our Resources Library to view all available literature, MSDS, and Thermcraft Videos. At Thermcraft, customer service is our number one priority. Your success is our business! Please feel free to contact us with any questions regarding Thermcraft products.

(336) 784-4800